Wood Fence Services
Wood Fence Installation
Request a QuoteWood Fence Repair
Request a QuoteWood Fence Remove & Replace
Request a QuoteWood Privacy Fence Installation by Exterior Fence Builders
At Exterior Fence Builders, our standard wood privacy fences are built to last using high-quality, pressure-treated materials and expert craftsmanship tailored for Gwinnett County and Metro Atlanta. Here’s how we do it:
🔩 Structural Posts
We install pressure-treated 4x4x8 pine posts, set in concrete 24 inches deep for long-term strength and durability. This solid foundation ensures stability through Georgia’s seasonal shifts.
🪵 Framing: Horizontal Rails
Each fence section includes three pressure-treated 2x4x8 rails—top, middle, and bottom—for maximum structural support and to prevent warping or sagging over time.
All rails are secured using galvanized ring-shank nails, which resist rust and pullouts better than standard nails.
🪚 Pickets: Pressure-Treated Pine or Cedar
We offer two high-quality options for privacy pickets:
Pressure-treated pine pickets: Secured with galvanized ring-shank nails for a strong, rust-resistant hold.
Cedar pickets: Fastened with aluminum picket nails to prevent rust streaks, preserving the natural look of cedar.
Both options provide full privacy coverage and are designed to withstand the Georgia climate.
🧰 Custom Fence Styles
For specialty wood fence styles like the Crossbuck Fence, we upgrade the framing and materials:
6x6x8 pressure-treated pine posts for added support
Top and bottom rails: 2x6x8 pressure-treated boards
X-design: 2x4x10 pressure-treated lumber
These fences combine function and standout design—ideal for large properties, farms, or upscale suburban lots.
🎨 Optional Finishing Touches
For a more refined finish, we offer:
Cap rails or trim boards: Enhance the look and protect the top edge of the fence
Decorative post caps: Help prevent water damage while adding curb appeal
✅ Why Choose Exterior Fence Builders?
Locally trusted in Gwinnett County and Metro Atlanta
Built with pressure-treated pine or cedar
Rust-resistant, pullout-resistant ring-shank nails
Custom designs available
Installed the right way, the first time
Exterior Fence Builders’ Pressure-Treated Pine Fence FAQs
Can I use Exterior Fence Builders’ pressure-treated pine for my fence?
Yes! Our pressure-treated pine is durable, cost-effective, and treated to resist termites and decay. It's an ideal choice for residential and commercial fencing projects in Gwinnett County and beyond. With proper installation and maintenance, it provides long-lasting protection and curb appeal.
What is pressure-treated wood?
Pressure-treated wood is lumber infused with preservatives to help it resist insects, rot, and fungal decay. It’s ideal for outdoor use, including fence boards, posts, and rails.
What are the advantages of using pressure-treated pine?
Pressure-treated pine is affordable, readily available, and strong for its weight. It accepts stain or paint well, making it a flexible choice for custom fence designs.
Does pressure-treated wood come with a warranty?
While treated wood typically doesn’t include a manufacturer warranty, Exterior Fence Builders offers a warranty against termite and fungal decay damage on all our treated pine fencing installations.
Will pressure-treated pine crack, warp, or turn gray?
Yes, over time. Pressure-treated wood, like all lumber, is porous and subject to environmental effects. It expands and contracts with moisture and UV exposure. Regular sealing and proper installation minimize warping and discoloration.
How do I maintain my pressure-treated pine fence?
Apply a water-repellent sealer with UV protection, use corrosion-resistant fasteners, and clean the fence periodically. Reapply sealant every 2–3 years to keep your fence looking new and protected.
Western Red Cedar Fence FAQs – Exterior Fence Builders
Where does Western Red Cedar come from?
Western Red Cedar is unique to the West Coast of North America. In British Columbia, it comprises nearly 21% of coastal forests. Inland Red Cedar, a subspecies, grows along the Rocky Mountains from mid-British Columbia to the Salmon River, and westward from Helena, Montana to Spokane, Washington.
What's the difference between nominal and actual thickness?
Nominal sizes are traditional labels that don’t reflect true measurements. For example, a 1" nominal board may actually measure 3/4", 21/32", or even 5/8" thick, depending on manufacturer standards. Thinner products are often still structurally sound and more economical to produce.
How does full width differ from scant width?
Full width refers to traditional sizing (e.g., 6", 4", 3"), while scant width reflects modern planed dimensions like 5-1/2", 3-1/2", or 2-1/2". These changes result from more accurate milling and evolving industry standards.
Why do knots fall out of boards, creating holes?
Knots are denser than surrounding wood and react differently to moisture, which can loosen their bond over time. Choosing Premium or #1 boards with both sides graded helps reduce this risk by ensuring knots are smaller and more intergrown.
What causes Cedar boards to develop black stains at the nails?
Black stains form when natural wood extracts react with fasteners, especially in moist conditions. Use double-dipped galvanized, stainless steel, or aluminum fasteners to prevent staining on Cedar, Redwood, and Cypress fences.
Can the stained Cedar be cleaned off?
Yes. Use Trisodium Phosphate (TSP) for brown-tinted stains. For black stains, Oxalic Acid is effective. Always identify the cause of the stain to select the correct cleaner. Commercial wood and concrete cleaners are also available.
What about using bleach and water?
Oxygen-type bleach (with sodium percarbonate) is effective against mildew and UV damage and will restore the wood’s natural appearance. Chlorine-based bleach works on mildew but not on tannin or iron stains. Use oxalic acid for those types of discoloration.
Why do boards split when fastened with nails?
Splitting occurs when incorrect nails or nailing techniques are used. Avoid needle point nails. Use blunt or diamond points, avoid overdriving nails, and predrill where needed to minimize splitting.
The boards at the top of my fence are warping. Why?
Backrails should be placed no more than 8" from the top and bottom of the boards. A 6' fence should use three backrails. Proper rail spacing helps resist warping caused by natural expansion and contraction.
What can be done to eliminate the effects of weathering and keep that "new fence" look?
While you can’t stop weathering, you can minimize it by using extra backrails, stainless or galvanized ring/spiral shank fasteners, and sealing with a UV- and water-repellent solution. Maintain your fence regularly with cleaning and refinishing every few years using a toner or clear UV protectant.
Wood Fence Styles
Built On-Site. Designed to Fit.
We custom-build every wood fence on-site—not from prefabricated panels sold online or in hardware stores. This allows us to follow the natural contours of your land and ensure a precise fit. The result? A stronger, better-looking fence built to last.
How We Build a Quality Wooden Privacy Fence
Built Right the First Time — With Expert Craftsmanship and Superior Materials
At Exterior Fence Builders, we install fences that don’t just look good on day one — they stay straight, strong, and beautiful for years to come. Here’s exactly how we do it:
- Posts
- 4x4 Pressure-Treated Pine Posts
- Set 24" deep in concrete footings for long-term strength and stability
- Engineered for Georgia’s dense red clay and shifting soil conditions
- Rails (Runners)
- 2x4 Pressure-Treated Wood Rails
- Three horizontal rails per section for 6' fences (top, middle, bottom)
- Four horizontal rails for 8' fences — extra support prevents sagging
- Rails are mounted to the sides of posts using galvanized ring-shank framing nails
- Pickets
- 1x6 Pickets (Pressure-Treated Pine or Cedar)
- 6 nails per picket on 6' fences — 2 nails per rail (one on each side of the picket)
- 8 nails per picket on 8' fences — 2 per rail for anti-warp and anti-curl performance
- Galvanized ring-shank nails for pine pickets
- Aluminum nails for cedar pickets to prevent black streaking and discoloration
- Why It Matters
We build fences that last. Using the correct nails, strategic rail spacing, and professional-grade materials keeps your fence from warping, sagging, or failing over time. Our install methods are tested against Georgia’s heat, humidity, and soil — and backed by over 25 years of experience.
Privacy fences are ideal for creating a solid barrier between properties. Choose from a variety of custom styles to match your aesthetic. Built for beauty, built for privacy.
Whether you’re adding charm to a front yard or setting a border, picket fences can be designed in unlimited styles to suit decorative, safety, or privacy needs.
Simple and rustic, this style uses the least amount of wood—perfect for open land, farms, or decorative perimeter fences. Commonly used for livestock containment and rural boundaries.
All our Good Neighbor designs look identical on both sides and are:
- Hand-crafted on site
- Built with rough-sawn Cedar boards and framework
- Anchored with pressure-treated Pine posts
We offer painting and staining services, giving you full creative freedom to finish your fence exactly how you want it. Stain it. Seal it. Paint it. Or leave it natural. The choice is yours.
Related Products
